Atomization and Sprays Journal of the International Institutes for Liquid Atomization and Spray Systems

ISSN for PRINT: 1045-5110

For Online Access

Best Paper Award Selection - Editorial Board Site

2000, Volume10

Issue 2

116 pages

Issue price - $75.00

Changsoo Jang
Department of Mechanical Engineering, KAIST, Taejon, Korea

Choongsik Bae
Department of Mechanical Engineering, Korea Advanced Institute of Science and Technology, Daejeon, Korea

Sangmin Choi
Department of Mechanical Engineering, Korea Advanced Institute of Science and Technology, Yusong-gu, Taejon, Korea

Basic characteristics of prototype intermittent swirl-generating nozzles for gasoline direct injection were investigated. These prototype swirl nozzles were fabricated by modifying commercial multipoint injection (MPI) nozzles to operate at higher pressures. Experimental parameters included injection pressure, injection duration, and ambient pressure. Spray tip penetration and atomization performance were examined as a function of these parameters. Droplet mean diameter, D₃₂, of the swirl nozzle ranged from 20 to 28 μm at an injection pressure of 5 MPa, which was about 30% smaller than that of the base MPI nozzles. Atomization characteristic was closely related to the overall velocity of the injected droplet cloud, ambient air density, and cone angle. Drop size distributions were found to fit to a Rosin-Rammler distribution and to be less dispersed than those of the air-assisted fuel injector.

Download article, 20 pages

Article price - $35.00

<< Previous article   Next article >>