ITEMS

modern scholarly publishers in the finest tradition

Journals

	Search

Atomization and Sprays

Journal of the International Institutes for Liquid Atomization and Spray Systems

ISSN for PRINT: 1045-5110

Institutional price:	$787.00
Issues per year:	8

Best Paper Award Selection - Editorial Board Site

2000, Volume10

132 pages

Issue price - $75.00

THE PERFORMANCE CHARACTERISTICS OF SOLID-CONE-SPRAY PRESSURE-SWIRL ATOMIZERS

Andrew J. Yule
Spray Research Group (SRG), Insititute of Materials Research (IMR), School of Computing, Science and Engineering, University of Salford, Manchester, UK

R. A. Sharief
Department of Mechanical & Aerospace Engineering, Thermo Fluid Division, UMIST, George Begg Building, Manchester, UK

J. R. Jeong
Atomization and Sprays Research Group, Department of Mechanical Engineering, UMIST, Manchester, England

G. G. Nasr
Spray Research Group (SRG), Insititute of Materials Research (IMR), School of Computing, Science and Engineering, University of Salford, Manchester, UK

D. D. James
Atomization and Sprays Research Group, Department of Mechanical Engineering, UMIST, Manchester, England

ABSTRACT

Pressure-swirl atomizers producing solid-cone sprays are commonly used in industry for cooling and cleaning applications, but there is very title published information on their atomization performance. In this experimental study, four generically representative atomizers are investigated for water supply pressures up to 2.1 MPa, for exit orifice diameters between 0.61 and 1.70 mm, and for an initial spray angle 56 ± 8°. Measurements are made of the drop sizes and velocities and of the liquid mass flux in the sprays up to 0.44 m downstream. Comparisons are made with other published data and the roles of swirl and turbulence inside the atomizers are discussed with respect to the atomization process and the structures of the sprays. In general, drop size is larger at the edges of the sprays and this effect is more marked for the more finely atomized sprays produced using the smaller atomizers. Correlations are developed for mean drop size, mean drop velocity, and drop mass flux, for the central spray region, as functions of distance downstream, atomizer size, and operating pressure. As in previous work with pressure-atomized sprays, the Weber number is of primary importance in determining drop size; however, the orifice diameter is also an important parameter. The correlations may be used when choosing atomizer sizes and operating conditions, particularly for spray cooling applications.