ICLASS 97
Proceedings of the Seventh International Conference on Liquid Atomization and Spray Systems
Proceedings of the Seventh International Conference on Liquid Atomization and Spray Systems
ISBN Print: 89-950039-2-8
Interest and activity in research and development in the fields of atomization and sprays are increasing dramatically. At this conference, 170 abstracts were submitted from 20 different countries, collecting important research in basic atomization, fuel injection, measurement techniques, modeling of sprays, twin-fluid atomization, process/industry applications, spray combustion, and other areas of interest.
目次
LDA Based Optical Particle Sizing of Spherical and Irregular Shape
DOI: 10.1615/ICLASS-97.10
pages 3-21
Detennining Factor for the Atomization of a High-Speed Liquid Jet
DOI: 10.1615/ICLASS-97.30
pages 31-38
The Effect of Gas Property on Atomization Features of Dissolved Gas Jet
DOI: 10.1615/ICLASS-97.40
pages 39-45
Black Liquor Sheet Breakup Mechanisms and the Effect on Drop Size
DOI: 10.1615/ICLASS-97.70
pages 62-69
Liquid Atomization Due to Laminar-Turbulent Transition of a Free Liquid Film Flow
DOI: 10.1615/ICLASS-97.80
pages 70-77
Experimental Study of the Near Field of a Breaking Liquid Sheet
DOI: 10.1615/ICLASS-97.90
pages 78-85
Detennination of Instability Scales on a Liquid Jet through an Image Analysis Method
DOI: 10.1615/ICLASS-97.120
pages 102-109
Use of the Theory of Nonlinear Dynamical Systems to Study the Growth of Perturbations in an Excited Water Jet
DOI: 10.1615/ICLASS-97.140
pages 117-124
Experimental Investigation of a Polydispersed Water Spray Impinging on a Conical Surface
DOI: 10.1615/ICLASS-97.150
pages 125-132
2MW Diesel Fuel Oil & Water Spray Characteristics - a Comparison
DOI: 10.1615/ICLASS-97.160
pages 133-140
Improvement of Spray Characteristics in N2 Gas and Liquefied CO2 Dissolved Diesel Fuel
DOI: 10.1615/ICLASS-97.170
pages 141-148
Spray Charateristics of Non-Reacting Diesel Fuel Spray by Experiments and Simulations with KIVA II Code
DOI: 10.1615/ICLASS-97.180
pages 149-156
Investigation on Fuel Spray and Injection Characteristics of Mini P-Size Pintle Nozzle and its Low Inertia Injector for Small IDI Diesel Engines
DOI: 10.1615/ICLASS-97.190
pages 157-163
Transient Injection Characteristics of a Pintle-Type Injector for Direct Injection of LPG
DOI: 10.1615/ICLASS-97.200
pages 164-174
Characteristics of the Internal Flow in a Diesel Injection Nozzle
DOI: 10.1615/ICLASS-97.210
pages 175-182
Effects of Fuel Viscosity and Ambient Temperature on Spray Characteristics from Multi-Hole Nozzle Injectors
DOI: 10.1615/ICLASS-97.220
pages 183-190
Internal Flow Analysis of a Diesel Spray Using Two Stage Injection System
DOI: 10.1615/ICLASS-97.230
pages 191-198
Effect of Fuel Injection Parameters on the Combustion Performance and Emission in the Direct Injection Type Diesel Engine
DOI: 10.1615/ICLASS-97.240
pages 199-206
Characterization of Cavitation Flow in a Simple Hole Nozzle
DOI: 10.1615/ICLASS-97.250
pages 207-214
Fuel Flow Characteristics and Cavitation Phenomena in Nozzle of Diesel Spray by Planer Acrylic Model
DOI: 10.1615/ICLASS-97.260
pages 215-222
Effect of Pressure Ratio on the Growth Charateristics of Impinging Diesel Sprays
DOI: 10.1615/ICLASS-97.270
pages 223-230
Experimental Study on the Droplets Distributions and Formation of Liquid Film after Impingement on the Heated Plate with and without Triangular Grooves
DOI: 10.1615/ICLASS-97.290
pages 239-246
Characteristics of Bubbling Liquid Jet Atomization across a High-Speed Airstream (Control of Spatial Distribution of Fuel Liquid and Combustion Gas Temperature)
DOI: 10.1615/ICLASS-97.300
pages 247-254
Disintegration of Annular Liquid Sheet with Core Air Flow - Mode Classification
DOI: 10.1615/ICLASS-97.310
pages 255-261
Experimental Investigation of Flow Conditions Inside an Air-Assisted Internal-Mixing Nozzle and their Correlation with Spray Data
DOI: 10.1615/ICLASS-97.320
pages 262-269
Effects of Mixing Chamber Geometry and Flow on Spray Characteristics from an Internal Mixing Twin-Fluid Atomizer
DOI: 10.1615/ICLASS-97.330
pages 270-277
Prediction of Required Pressure for Flow Rate of Internal Twin Fluid Atomizers
DOI: 10.1615/ICLASS-97.340
pages 278-285
Flow Characteristics and Influence of Shock Wave Interactions on Drop Size in Twin-Fluid Atomizers
DOI: 10.1615/ICLASS-97.350
pages 286-293
Cross-Sectional Spray Patternation of an Airblast-Atomized Liquid Jet Injected into a Crossflow
DOI: 10.1615/ICLASS-97.360
pages 294-301
Distributions and Collisions of Sprays in an Airblast Planar Injector
DOI: 10.1615/ICLASS-97.370
pages 302-309
Disintegration Characteristics of Liquid Jet Ejected from Internal Mixing Twin Fluid Atomizers
DOI: 10.1615/ICLASS-97.380
pages 310-317
Spray Characteristics of Y-Jet-Type Airblast Atomizer Embedding Fluid Amplifier
DOI: 10.1615/ICLASS-97.390
pages 318-325
Unsteady Breakup of Liquid Jets in Coaxial Airblast Atomisers
DOI: 10.1615/ICLASS-97.400
pages 326-333
The Gas-Flowfield in the Atomization Region of a Free-Fall-Atomizer
DOI: 10.1615/ICLASS-97.410
pages 334-341
Activities on Liquid Atomization at the Research Center Lampoldshausen of the German Aerospace Research Establishment
DOI: 10.1615/ICLASS-97.420
pages 345-352
The Break-up Length of Laminar Cylindrical Liquid Jets. Modification of Weber's Theory
DOI: 10.1615/ICLASS-97.430
pages 353-360
A Parametric Study on the Utilization of Gas Dissolution Effect in Steady Sprays
DOI: 10.1615/ICLASS-97.450
pages 369-376
Active Instability Suppression Using Vortex-Droplet Interaction
DOI: 10.1615/ICLASS-97.460
pages 377-384
Experimental Study on Droplet Ejection Due to Gas Bubble Bursting on Liquid Surface (Basic Study for its Application to Particle Production)
DOI: 10.1615/ICLASS-97.470
pages 385-392
The Effect of Manifold Cross-Flow on the Discharge Coefficient of Sharp-Edged Orifices
DOI: 10.1615/ICLASS-97.490
pages 401-408
Effects of the Internal Flow in a Nozzle Hole on the Breakup Processes of a Liquid Jet
DOI: 10.1615/ICLASS-97.510
pages 417-424
Experiments on the Structure of Twin Overlapping Spray from Two Pressurized-Type Swirl Nozzles
DOI: 10.1615/ICLASS-97.530
pages 433-439
A Study of the Injection of Twin Pulsed High Speed Liquid Jets Across Transonic Region
DOI: 10.1615/ICLASS-97.540
pages 440-447
Experimental Investigation of Polydisperse Spray Interaction
DOI: 10.1615/ICLASS-97.550
pages 448-455
Experimental and Numerical Study on Spray Flows in Confined Jets
DOI: 10.1615/ICLASS-97.560
pages 456-465
Internal Structure of Vaporizing Pressure-Swirl Fuel Sprays
DOI: 10.1615/ICLASS-97.580
pages 474-481
Atomization Versus Targeting for Port-Fuel Injectors - An Unresolvable Conflict ?
DOI: 10.1615/ICLASS-97.600
pages 490-497
Characterization of Direct-Injection Gasoline Sprays under Different Ambient and Fuel Injection Conditions
DOI: 10.1615/ICLASS-97.610
pages 498-505
Experimental Investigation on the Atomization Characteristics of a Doublet Impinging-Jet Injector
DOI: 10.1615/ICLASS-97.620
pages 506-512
Spray Break-Up Process of Diesel Fuel Investigated Close to the Nozzle
DOI: 10.1615/ICLASS-97.630
pages 513-520
Experimental Investigation of a LOX Spray under Hot Fire Conditions
DOI: 10.1615/ICLASS-97.640
pages 521-528
Initial Atomization of an Intermittent Spray from a Diesel Nozzle
DOI: 10.1615/ICLASS-97.650
pages 529-536
Spray Trajectories of Liquid Fuel Jets in Subsonic Crossflows
DOI: 10.1615/ICLASS-97.670
pages 545-552
Spray Characteristics of an Intermittent Air-Assisted Fuel Injector
DOI: 10.1615/ICLASS-97.680
pages 553-560
Liquid Core Characterisation of Coaxial Liquid Oxygen/Inert Gas Jets
DOI: 10.1615/ICLASS-97.690
pages 561-568
Fuel Droplet Dynamics and Dispersion of Practical Twin-Fluid Atomizer for Oil Furnace
DOI: 10.1615/ICLASS-97.700
pages 569-576
Heat Transfer in the Acoustic Field of an Ultrasonic Atomizer
DOI: 10.1615/ICLASS-97.710
pages 577-584
Development of a Multi-Aperture-Membrane Ultrasonic Atomizer
DOI: 10.1615/ICLASS-97.720
pages 585-592
Characterization of Sprays Produced by Low Frequency Ultrasonic Atomizers
DOI: 10.1615/ICLASS-97.730
pages 593-600
Atomization of Liquids with Widely Differing Material Properties by Ultrasonic Standing-Waves
DOI: 10.1615/ICLASS-97.740
pages 601-608
Mechanical and Electrostatic Dispersion of a Polydisperse Cluster of Drops for Soot Control
DOI: 10.1615/ICLASS-97.760
pages 617-624
Performance Data of an Electrostatic Atomizer for Highly Resistive Liquids
DOI: 10.1615/ICLASS-97.770
pages 625-632
Prediction of the Effect of Electrostatic Charging on Spray Characteristics
DOI: 10.1615/ICLASS-97.780
pages 633-640
Application of Laser Diagnostic Techniques to Characterise the Spray Issued from a pMDI
DOI: 10.1615/ICLASS-97.790
pages 641-648
Spray Characterization Using a Planar Droplet Sizing Technique
DOI: 10.1615/ICLASS-97.800
pages 649-656
Measurement of the Extensional Properties of Polyacrilamide Solutions Using the Falling Droplet Technique
DOI: 10.1615/ICLASS-97.810
pages 657-664
Equivalence Ratio Measurements in Vaporized Fuel Spray Using Laser Raman Scattering
DOI: 10.1615/ICLASS-97.820
pages 665-670
Determination of the Optimum Droplet Size and Operation Condition for Minimum Drift
DOI: 10.1615/ICLASS-97.840
pages 682-689
Droplet Size Distribution of Air-Carrier Sprayer for Orchard
DOI: 10.1615/ICLASS-97.850
pages 690-697
Performance Characteristics of an Electrostatic Crop Spraying Nozzle for Green House Applications
DOI: 10.1615/ICLASS-97.860
pages 698-705
On the Atomization Characteristics of Twin Fluid Nozzles for Cold Fog Machine (I)
DOI: 10.1615/ICLASS-97.870
pages 706-713
Atomization Characteristics of Liquefied n-Butane Spray with Flash Boiling Phenomena
DOI: 10.1615/ICLASS-97.880
pages 714-721
Experimental Study of Evaporation of a Liquid Drop Containing Alumina Particles
DOI: 10.1615/ICLASS-97.890
pages 722-729
Atomization Characteristics of Liquefied n-Butane Spray Injected by High Injection Pressure
DOI: 10.1615/ICLASS-97.900
pages 730-737
Mass Transfer from Evaporating 1-Hexanol Drop by Using Two Experimental Technique
DOI: 10.1615/ICLASS-97.910
pages 738-744
Considerations of the Aircraft Engine Fuel Pumping Systems and Fuel Management for the Next Generation
DOI: 10.1615/ICLASS-97.920
pages 745-751
Transient Cooling of High Temperature Metal Surface with Impinging Water Sprays
DOI: 10.1615/ICLASS-97.930
pages 752-764
Investigation of Droplet Drying Characteristics Using an Acoustic-Aerodynamic Levitator
DOI: 10.1615/ICLASS-97.960
pages 780-787
Theoretical Determination of Spray Drop Size Distributions
Part 1 : Description of the Procedure DOI: 10.1615/ICLASS-97.970 pages 788-795
Part 1 : Description of the Procedure DOI: 10.1615/ICLASS-97.970 pages 788-795
Theoretical Determination of Spray Drop Size Distributions
Part 2: Applications DOI: 10.1615/ICLASS-97.980 pages 796-803
Part 2: Applications DOI: 10.1615/ICLASS-97.980 pages 796-803
Development of a Diesel Spray Atomization Model Considering Nozzle Flow Characteristics
DOI: 10.1615/ICLASS-97.1020
pages 828-835
A Study of the Two-Way Coupling Modelling for the Two-Phase Flow Simulation in a Lean Premixer Prevaporizer Module
DOI: 10.1615/ICLASS-97.1030
pages 836-843
Modelling of Electrohydrodynamic Processes within a Charge Injected Fuel Spray Nozzle
DOI: 10.1615/ICLASS-97.1040
pages 844-851
Two-Phase Flow Simulation of a Dump Combustor under Realistic Conditions
DOI: 10.1615/ICLASS-97.1050
pages 852-859
Lagrangian Transport Equation of Fluctuating Kinetic Energy in the Dispersed Phase
DOI: 10.1615/ICLASS-97.1060
pages 860-867
Characterisation of the pMDI Spray Using Numerical Methods
DOI: 10.1615/ICLASS-97.1080
pages 876-883
An Investigation of Combustion of Liquid Hydrocarbon Sprays in Homogeneous Mixtures of Fuel and Air
DOI: 10.1615/ICLASS-97.1090
pages 884-892
Combustion of an Array of Fuel Droplets - A Theoretical Analysis
DOI: 10.1615/ICLASS-97.1100
pages 893-901
Interface Capturing and Universal Treatment of Solid, Liquid and Gas by CIP Method
DOI: 10.1615/ICLASS-97.1110
pages 902-909
Phase Doppler Measurements on a Pressurised Spray Nozzle Using Scattering Angles of 72° and 150°
DOI: 10.1615/ICLASS-97.1120
pages 910-917
Remarks on Extended Application of the Immersion Liquid Method for Droplet Size Measurement
DOI: 10.1615/ICLASS-97.1130
pages 918-925
Droplet Size Measurements in a Diesel Fuel Spray Using a Planer Laser Induced Fluorescence Method
DOI: 10.1615/ICLASS-97.1140
pages 926-933
Time-Resolved Diffraction Granulometer for Measurements in Transient Sprays
DOI: 10.1615/ICLASS-97.1150
pages 934-941
Effects of Light-Absorbing Droplets and Optical Factors on a Phase Doppler Particle Size Analyzer
DOI: 10.1615/ICLASS-97.1160
pages 942-949
Time Dividing Analysis of Intermittent Fuel Spray Flows Measured by PDA
DOI: 10.1615/ICLASS-97.1170
pages 950-957
Characterization of Liquid-Liquid Mixing in Sprays Using Rainbow Refractometry
DOI: 10.1615/ICLASS-97.1180
pages 958-966
LDV Measurements of Air Entrainment Produced by the Impact of a Diesel Spray on a Flat Wall
DOI: 10.1615/ICLASS-97.1190
pages 967-974
A Comparative Study of Annular Two-Phase Flow Using Phase Doppler and Laser Diffraction Techniques
DOI: 10.1615/ICLASS-97.1200
pages 975-982
Set-up Parameter Optimization of Phase Doppler Technique for Spray Measurement
DOI: 10.1615/ICLASS-97.1210
pages 983-990
Entrained Water Atomization Experiments and Its Size Measurements Using Optical Measurement Techniques
DOI: 10.1615/ICLASS-97.1220
pages 991-998
On-Line Process Control in Melt Spraying Using Phase - Doppler Anemometry
DOI: 10.1615/ICLASS-97.1230
pages 999-1006
Comparison between Laser Diffraction Method and Phase Doppler Method for Spray Characteristics of Air-Assisted Swirl Atomizer
DOI: 10.1615/ICLASS-97.1240
pages 1007-1014
Critical Conditions for Single Droplets Ignition and Combustion
DOI: 10.1615/ICLASS-97.1260
pages 1023-1033
Analysis of Production Process of Oxidized Metallic Powder (Preparation of Cerium Dioxide Particles by Spray Pyrolysis Method)
DOI: 10.1615/ICLASS-97.1280
pages 1045-1052
Numerical and Experimental Investigations of the Spray Coating Process
DOI: 10.1615/ICLASS-97.1290
pages 1053-1060
Spray Coating of Solid Particles: Process Optimization Using Numerical Calculations
DOI: 10.1615/ICLASS-97.1300
pages 1061-1068
Theory of the Film Coating by Entrainment and Displacement for High Capillary Number Values
DOI: 10.1615/ICLASS-97.1310
pages 1069-1073
Observation of Droplet Cluster Behaviors in a Premixed-Spray Flame by Laser Tomography
DOI: 10.1615/ICLASS-97.1330
pages 1082-1089
Simulation of Soot Formation Behavior in Carbon Black Furnace
DOI: 10.1615/ICLASS-97.1360
pages 1106-1113
Combustion Characteristics of Diesel Spray in High-Pressure Environment
DOI: 10.1615/ICLASS-97.1370
pages 1114-1121
Two-Step Spray Aerosol Generator for Low Pressure Applications
DOI: 10.1615/ICLASS-97.1380
pages 1122-1129
Begell Recommend
Electrospinning of Micro- and Nanofibers: Fundamentals in Separation and Filtration Processes Y. FilatovA. Budyka
V. Kirichenko ISBN 印刷: 978-1-56700-241-6
ISBN オンライン: 978-1-56700-240-9
Thermal Radiation in Disperse Systems: An Engineering Approach Leonid A. Dombrovsky
Dominique Baillis ISBN 印刷: 978-1-56700-268-3
ISBN オンライン: 978-1-56700-351-2