ITEMS

modern scholarly publishers in the finest tradition

	Search

ICHMT DIGITAL LIBRARY ONLINE

ISSN 961-91393-0-5

Individual price:

$246.00 (Must be sent to your home address)

You can order single issue or individual article. To purchase a single issue or an individual article as well as to view tables of contents and abstracts click on issue number.

Institutional price:

$518.00

Volumes per year:

various

For Online Access

Year 1997

• 1Radiative Transfer II
Proceedings of the Second International Symposium on Radiation Transfer - Kusadasi, Turkey, July, 1997

632 pages

Volume price - $192.00

THE EFFICIENCY OF THE RADIATION PROCESS IN THE CURING OF POWDER COATINGS WITH GASEOUS INFRARED HEATERS

J. Deans
Department of Mechanical Engineering, University of Auckland, Auckland, New Zealand

M. Kogl
Department of Mechanical Engineering, University of Auckland, Auckland, New Zealand

B. Leema
Department of Mechanical Engineering, University of Auckland, Auckland, New Zealand

ABSTRACT

This paper describes a study (1) which investigated the efficiency of the radiant heat transfer process during the curing of powder coated surfaces. Experiments were carried out using a porous ceramic radiant burner, fired with natural gas, these test measurements were subsequently interpreted using a Monte Carlo algorithm. This algorithm used non-grey calculation procedures based on the Edwards exponential wide band model for the absorption coefficients of the radiating flue gas components. The spectral properties of the powders were measured using a diffuse reflectance Fourier Transform infrared spectrometer.
The results show that the energy transferred to the powder during this process was limited to between 30 and 36% of the energy input from the burning gas and that this efficiency increased slightly with burner temperature and decreased with powder temperature. The quality of the cured surface tended to decrease with increasing burner temperature and it was closely related to the rate of heating of the powder.