Início Livros eBooks Diários Referências e Anais Autores, editores, revisores Índice de produtos de A a Z Prêmios
Compact Heat Exchangers and Enhancement Technology for the Process Industries - 2003

ISBN:
978-1-56700-195-2 (Imprimir)
978-1-56700-437-3 (On-line)

Compact Heat Exchangers and Enhancement Technology for the Process Industries - 2003

Ramesh K. Shah
University of Kentucky, Lexington, KY; and Delphi Harrison Thermal Systems, Lockport, NY

Descrição

This book includes a total of 65 papers from 16 countries and is divided into the follwoing sections:

Single-Phase Flow and Heat Transfer Fundamental Studies
Single-Phase Augmentation Techniques
Single-Phase Heat Transfer Design Data and Methods
Single-Phase Heat Exchanger Development and Applications
Phase-Change Heat Transfer Fundamental Studies
Condebsation and Vaporization Augmentation Techniques
Vaporization and Condensation Design Data and Methods
Phase-Change Heat Exchanger Developmet and Applications
Fouling in Heat Exchangers

These papers represent a focused attention to the use of CHEs and Enhancement Technology in the process industries and indicateenormous opportunities.



497 pages, © 2003

Table of contents:

Preface
SINGLE-PHASE FLOW AND HEAT TRANSFER FUNDAMENTAL STUDIES
Detailed Thermal and Flow Fields in a Rectangular Duct with Inclined Ribs
3D Numerical Simulation on Laminar Heat Transfer and Fluid Flow Characteristics of Slitted Fin Surfaces: Investigation of Strip Location Effect
Heat Transfer Performance of a Wavy Channel and Related Turbulence Structure
Heat Transfer at Turbulent Separated Flow in Models of Compact Heat Exchanger
Heat Transfer Characteristics of Flows in Undulated Rectangular Duct for Micro Gas Ibrbine Recuperator
Experimental Study on Pressured Drop Through a Woven Screen Subjected to an Oscillating Flow
Heat Transfer and Pressure Loss for Flows Inside Converging and Diverging Channels with Surface Concavity Shape Effects
Numerical Computation for the Natural Ventilation of Air from a Vertical Open Cylinder with a Magnetic Field
PIV Visualizations of the Flow Structure Upstream of the Ttibes in a Two-Row Plate-Fin-and-lhbe Heat Exchanger
Visco-Elastic Fluid Flow Sweeping a Cavity between Rectangular Ribs
SINGLE-PHASE AUGMENTATION TECHNIQUES
Keynote Paper: Principle of Field Coordinated Enhancement of Single Phase Thermal Convection
Enhanced Heat Transfer Method“Breathing Effect” at Low Reynolds Number and Its Applications
Thermal Hydraulic Investigation of Metallic Foams for Compact and Multi-Functional Heat Exchanger
Heat Transfer Characteristics of Perforated Fin Heat Exchanger with Intense Turbulence
SINGLE-PHASE HEAT TRANSFER DESIGN DATA AND METHODS
Keynote Lecture: Flow and Heat Transfer in Louvered and Offset-Strip Fin Arrays: The Effects of Vortex Shedding and Boundary-Layer Re-starting
Heat Transfer in Packed Beds from Pressure Drop - An Application of the Leveque Analogy
Heat Transfer Performance of Each Row in Fin and Tube Heat Exchangers
Air Side Thermal-Hydraulic Characteristics of Rectangular Finned-Tube Heat Exchangers with Elliptic Tubes
Modelling of Heat Transfer and Hydraulic Resistance of Turbulent Gas and Liquid Flow in Tubes with Circular Turbulizers
Heat Transfer and Hydraulic Resistance in Compact Heat Exchangers with Helical Tubes in Longitudinal Flow
Resonance Intensification of Heat Transfer in Oscillating Flows
Heat Transfer Enhancement in Short Rectangular Channels with Transverse Projections and Grooves
Generation of Longitudinal Vortices Using Surface Corrugations
CFD Simulation on Natural Convection Circuit among Tube Bundle of Residual Heat Removal Exchanger
Thermal Efficiency of Compact Heat Exchangers Using Finned Pipes with Inclined Fins
New Design Equations For Liquid/Solid Fluidized Bed Heat Exchangers
SINGLE-PHASE HEAT EXCHANGER DEVELOPMENT AND APPLICATION
Keynote Paper: High Performance Recuperator for the Solid Oxide Fuel Cell - Micro Gas Turbine Hybrid System
Heat Exchangers for Fuel Cell Systems
Performance Evaluation of Two Kinds of Heat Exchangers by Using Water Solutions with Flow Drag Reduction Surfactant
A Heat and Mass Transfer Analysis of Cross-Flow Air-to-Air Total Heat Exchangers Made of Moisture-Permeable Paper
Semicircular Heat Exchangers
Optimal Design and Assessment of High Performance Micro Bare-Tube Heat Exchangers
Influence of Different Process Parameters on Vegetable Drying in Gas Fluidized Beds
Experimental and Theoretical Investigations of a Pilot Compact Heat Exchanger for Heat Recovery at the Hamburger Aluminium Werk GmbH
Flexible Heat Exchange Solutions Fit for Lifetime Operation of Oil & Gas Production Facilities
PHASE-CHANGE HEAT TRANSFER FUNDAMENTAL STUDIES
Keynote Paper: Flow Patterns during Condensation in Smooth and Micro-Fin Tubes
Heat and Mass Transfer on Teflon Coated Tubes Used for Latent Heat Recovery
Subcooled Flow Boiling of Water in Narrow Vertical Channels
Visualizations of Pool Boiling of Propane/Iso-Butane Mixtures on an Enhanced Tube
Improvement of Surface Wettability by Plasma Irradiation
Branching of Two-Phase Flow from a Vertical Header to Horizontal Parallel Channels
A Visual Study of Air-Water Two-Phase Flow in a Vertical Return Bend
Visual Observations of the Frost Formation in Fin Arrays
Flow and Heat Transfer Characteristics of a Natural Circulation Cooling System for Electronic Components
Development of a New High Density Package Cooling Technology Using Low Melting Point Alloys
CONDENSATION AND VAPORIZATION AUGMENTATION TECHNIQUES
Experimental Verification of a New Approach for Film Condensation Heat Transfer Enhancement of Ethylene Glycol Vapour
Enhanced Condensation of CFC113 on a Horizontal Wire-Wrapped Tube
Condensate Retention and Dynamic Drainage from the Air-Side Surface of Automotive-Style Heat Exchangers
Heat Removal Augmentation in Steam Generating Channels With Swirled Flows
VAPORIZATION AND CONDENSATION DATA AND METHODS
An Extension of the Flow Boiling Correlation to Transition, Laminar and Deep Laminar Flows in Minichannels and Microchannels
Nucleate Boiling Heat Transfer of Refrigerants R-134A and R-404A on Porous and Structured Surface Tubes
Some Investigations on Two-Phase Upward Flow in Small Channels at Small Mass Fluxes
Modelling of Laminar Film Reflux Condensation in an Inclined Small Diameter Tube and Experimental Verification
Development of Plasma Spray-Coated Tubes for Compact Evaporator
PHASE-CHANGE HEAT EXCHANGER DEVELOPMENT AND APPLICATIONS
Keynote Lecture: Compact Heat Exchangers as Chemical Reactors
Experimental Study on R-407C Evaporation Heat Transfer Characteristics in Plate and Shell Heat Exchanger
Ultra Thin and Light Weight RS Evaporator
Advanced and High Performances Heat Exchangers for the Gas Processing Industries
Development of Aluminum Micro Channel Condenser for Air Conditioners
Modelling of the Fluid Distribution in a Parallel PFHE Arrangement for the Liquefin LNG Process
Thermal and Hydraulic Performance of Plate Heat Exchangers as Condensers
Condensation of Pure Fluids and Mixtures of Process Fluids in Compact Welded and Spiral Heat Exchangers
A Model for Design of a Newly Developed Melting-Freezing Rotating Device Transferring Heat from a Heat Source to a Heat Sink
FOULING IN HEAT EXCHANGERS
Combating Heat Exchanger Fouling and Corrosion Phenomena in Process Waters
Reduce Fouling and Downtime using Helixchanger® Heat Exchangers
Author Index