Kundenlogin 0 Einkaufswagen
Home Bücher eBücher Zeitschriften Referenzen und Berichte Autoren, Herausgeber, Rezensenten A – Z Produktindex
Progress in Plasma Processing of Materials, 2001

ISBN Druckformat: 1-56700-165-3



The RF plasma process is used to purify and to deposit silicon powders on a substrate. The experimental conditions used (Argon plasma, P =25 kW, d(injection) =20 cm) lead to a high deposition rate (600 µm.h−1) of dense polycrystalline silicon. The nature of the substrate seems to be of great importance for the deposit quality: in the case of an alumina substrate, the surface of the deposit has a high porosity but for a mullite substrate, the porosity disappears. The efficiency of the mass deposition is close to 50 % for the injection of particles with an average diameter close to 100 µm, for a mass flow rate of 0.1 g.mn−1 on a 2×2 cm2 substrate.
The plasma process allows a local injection of silicon powders in the plasma which leads to the purification of the material. The LDA measurements in the plasma flow permitted the determination of the trajectories and the velocity (24 m.s−1 for a residence time (τ) of 10 ms in the jet) of the injected silicon particles. The displacement of the substrate under the plasma flow leads to a high purification of the deposit by a mechanism close to a zone refining (SEM/EDX analysis).
The introduction of Hydrogen in the plasma during the treatment improves the photovoltaic properties of the deposited silicon. The identification of the different hydrogen excited species of the plasma has been undertaken by OES.
Home Begell Digitales Portal Begell Digitale Bibliothek Zeitschriften Bücher eBücher Referenzen und Berichte Autoren, Herausgeber, Rezensenten A – Z Produktindex Preise und Aborichtlinien Über Begell House Kontakt Language English 中文 Русский 日本語 Português Deutsch Français Español