The home for science and engineering™

English
中文
Русский
日本語
Português
Deutsch
Français
Español
Prices and Subscription Policies
About Begell House
Contact Us
Transport Phenomena in Thermal Engineering. Volume 2

ISBN Print: **1-56700-015-0**

The Particle Image Velocimetry (PIV) is a superior technique to measure the velocity distributions in the vessel. However, in order to measure the three-dimensional velocity distributions using PIV, the three-dimensional positions of the tracer particles should be determined from the two-dimensional images. Therefore, two or more images are taken from different angles at the same time to cause the complex measurement systems, e.g., three cameras, synchronous recorder, stroboscope.

The author had developed the new PIV called VVH (Velocity Vector Histogram) method. In this method only two images taken from different angles are used to identify the particle three-dimensional positions. The uncertainty of the three-dimensional particle identification can be abandoned in the velocity vector histogram. The unidentified particle positions are considered as noise, and are omitted in the velocity vector histogram. Namely, the three-dimensional particle positions are determined using the velocity information.

The VVH method was applied to the complex three-dimensional flow. The relatively high velocity fields including a circulating flow were measured and the effectiveness of the VVH method were discussed. Several techniques to improve the accuracy and the dynamic range of the measured velocities were evaluated using the three-dimensional VVH method.

The author had developed the new PIV called VVH (Velocity Vector Histogram) method. In this method only two images taken from different angles are used to identify the particle three-dimensional positions. The uncertainty of the three-dimensional particle identification can be abandoned in the velocity vector histogram. The unidentified particle positions are considered as noise, and are omitted in the velocity vector histogram. Namely, the three-dimensional particle positions are determined using the velocity information.

The VVH method was applied to the complex three-dimensional flow. The relatively high velocity fields including a circulating flow were measured and the effectiveness of the VVH method were discussed. Several techniques to improve the accuracy and the dynamic range of the measured velocities were evaluated using the three-dimensional VVH method.

A. Budyka

V. Kirichenko ISBN Print: 978-1-56700-241-6

ISBN Online: 978-1-56700-240-9

Thermal Radiation in Disperse Systems: An Engineering Approach Leonid Dombrovsky

Dominique Baillis ISBN Print: 978-1-567000-268-3

ISBN Online: 978-1-56700-351-2