Ingreso de Usuario 0 Carrito de Compras
Inicio Libros eLibros Revistas Referencias y Libros de Ponencias Autores, Editores, Críticos Índice de Productos de la A a la Z
Energy and the Environment, 1998

ISBN Imprimir: 1-56700-127-0

CONVECTIVE HEAT TRANSFER FROM A FLAT SURFACE TO AN OBLIQUE IMPINGING AIR JET

Sinopsis

In the present paper, an experimental investigation was performed to characterise the corrective heat transfer of the jet, issuing from along tube, impinging at a different oblique angles on a flat surface maintained at constant temperature. The temperature on the impingement plate was measured using a thermochromic liquid crystal. The local heat transfer coefficients on the surface were obtained using transient method. The result indicate that the maximum heat transfer occurred at the point displaced from the geometric stagnation point. At the stagnation point, it was observed that the local Nusselt number decreases with decreasing jet inclination angles. For the 45 deg. and H/D=14, it was found that the stagnation point Nusselt number reduced 22 percent compared with that of the normal jet. In the paper, the variation of the local Nusselt numbers with the depending parameters was presented and the empirical relation concerning the local Nusselt number was given.
Inicio Portal Digitalde Begell Biblioteca Digital Begell Revistas Libros eLibros Referencias y Libros de Ponencias Autores, Editores, Críticos Índice de Productos de la A a la Z Precios y Políticas de Suscripcione Sobre Begell House Contáctenos Language English 中文 Русский 日本語 Português Deutsch Français Español