Progress in Plasma Processing of Materials, 2001

ISBN Print: 1-56700-165-3

MAIN GUIDELINES FOR PRODUCING HIGH NITROGEN STEELS USING THERMAL PLASMA

DOI: 10.1615/ITPPC-2000.940
pages 721-727

Sinopsis

The application of thermal plasma was intended to enable the introduction of the excess chemical potential of a non-equilibrium phenomenon in character, and the obtained nitrogen concentration in liquid metal is a stationary concentration.
A quarter-technical scale laboratory plasma furnace with a ceramic crucible and an operation pressure of up to 5 atm, constructed at the Steelmaking Laboratory of the Faculty of Metallurgy and Material Engineering was used in the experiments. Based on the investigation results, the model calculations of the energy-physical properties of the plasma arc, and on the assumptions resulting from the specialist literature on the subject, a semi-empirical model of saturating liquid steel with nitrogen using thermal plasma has been developed. Using this model, a technological prediction has been prepared.
The basic results of the investigations have enabled the authors to create the idea of a pilot installation for HNS steel production including the capability of complete saturation with nitrogen using a gas carrier in a single-stage process. The developed process has been briefly named the PPMP (Plasma Pressure Melting Process).