Ingreso de Usuario 0 Carrito de Compras
Inicio Libros eLibros Revistas Referencias y Libros de Ponencias Autores, Editores, Críticos Índice de Productos de la A a la Z
Progress in Plasma Processing of Materials, 2001

ISBN Imprimir: 1-56700-165-3

A new low pressure plasma nitriding and PVD coating duplex treatment of HSS substrates

Sinopsis

In situ duplex plasma nitriding and PVD coating was performed using the combined steered arc unbalanced magnetron production scale unit (Hauzer HTC 1000/ABS). The processing procedure customary used was modified and further steps relating to the new plasma nitriding were added. In particular the total pressure during nitriding was reduced from 2−5 mbar, which is typical for pulse plasma nitriding process, to 5−10×10−3 mbar. To enhance ionisation to a sufficiently high level the available four magnetrons were ignited at a low power level (0.5 W/cm2). Furthermore, electromagnetic coils were used to generate a closed magnetic field situation, thus, reducing the loss of electrons to the chamber walls.

Using the duplex plasma nitriding (treatment time 30min.) and PVD treatment, 3 microns thick TiAlCrYN coatings were deposited onto flat HSS coupons. Scratch test results showed a substantial enhancement of the critical load (Lc > 80 N) compared to un-nitrided coated samples (Lc ~ 50 N).

It is important to note that these high adhesion values have been obtained only when the thin build-up in carbon near the surface, which was generated during the plasma nitriding step, was etched away by metal ion etching with Cr+ directly prior to coating.
Inicio Portal Digitalde Begell Biblioteca Digital Begell Revistas Libros eLibros Referencias y Libros de Ponencias Autores, Editores, Críticos Índice de Productos de la A a la Z Precios y Políticas de Suscripcione Sobre Begell House Contáctenos Language English 中文 Русский 日本語 Português Deutsch Français Español