Inicio Libros eLibros Revistas Referencias y Libros de Ponencias Autores, Editores, Críticos Índice de Productos de la A a la Z Premios
Progress in Plasma Processing of Materials, 2001

1-56700-165-3 (Imprimir)


A. P. Veselovskiy
Technical University, Polytechnic Sir 29, 195251 Saint Petersburg, Russia

Sergey V. Dresvin
Laboratory of Electrotechnological and Plasma Installation of Polytechnic Institute -SPb State Polytechnical University, 29 Polytechnicheskaya Str., 195251 Saint-Petersburg, Russia

D. Ivanov
St. Petersburg State Polytechnic University, 29 Politekhnicheskaya Str., St. Petersburg, 195251, Russia


The method of liquid-plasma treatment (LPT) finds an increasing employment for a polishing of surfaces of steel products.
The LPT-method applies the voltages (250 - 300 V) increased in comparison with the electromechanical method and the weak solutions of non-toxic salts.
Investigation of volt-ampere characteristics and photography of the steam-gaseous jacket formation process have allowed to conclude that the glow discharge between the metallic anode and the electrolyte cathode takes place without transition to arc in a wide range of current densities (0.2 - 5 A/cm2).
Investigation of temperature of samples during the treatment has shown increase of that temperature by 30− 35 °C in comparison with temperature of un electrolyte.
Electron emission from the electrolyte cathode didn't study enough. A proposed model allows to explain processes of initiation and maintenance of the glow discharge in the systems: the solid metallic anode - plasma - the electrolyte cathode. The further analysis of processes will allow to forecast the electrolyte composition for the polishing.