Inicio Libros eLibros Revistas Referencias y Libros de Ponencias Autores, Editores, Críticos Índice de Productos de la A a la Z Premios
Proceedings of Symposium on Energy Engineering in the 21<sup>st</sup> Century (SEE2000) Volume I-IV

ISBN Imprimir:


Zhi-Xin Li
Key Laboratory for Thermal Science and Power Engineering of Ministry of Education School of Aerospace, Tsinghua University

Dongxing Du
College of Electromechanical Engineering, Qingdao University of Science and Technology, Qingdao 266061, China; Qingdao Municipal Key Laboratory on Geological & Exploration Engineering Technology for Enhanced Shale Oil & Gas Recovery, Qingdao

Zeng-Yuan Guo
Key Laboratory for Thermal Science and Power Engineering of Ministry of Education, Department of Engineering Mechanics, Tsinghua University, Haidian District, Beijing 100084, China


A new tube-cutting method that was proven feasible by experimental results is adapted to measure the pressure and Mach number distribution along a microtube. Experiments and computation were also performed concerning the average Fanning friction factor of five microtubes with diameter ranging from 80.0 to 166.6 µm. It is found that the pressure distribution in a microtube became nonlinear at higher Mach number and the product of measured average Fanning friction factor Cfa and the Reynolds number Re is higher than 16 predicted by Moody chart for laminar flow. Numerical results show that the gas compressibility leads to a variation of the velocity profile, which results in a larger velocity gradient at the tube inner wall surface and consequently a larger friction coefficient. The transition from laminar to turbulence in microtubes occurs at Re ~ 2300, which is consistent with the results in macro tubes.