Accueil Livres eBooks Revues spécialisées Références et comptes rendus Auteurs, éditeurs, examinateurs Index A-Z des produits Récompenses
Progress in Plasma Processing of Materials, 1997

ISBN Imprimer:


M. Entezarian
PERMA, Montreal, Canada, H3J 1R4

Peter G. Tsantrizos
Pegasus Refractory Materials, Inc., Montreal, Canada, H3J 1R4

Francois Allaire
Hydro-Quebec, LTEE, Shawinigan, Quebec, G9N 7N5

R.A.L. Drew
McGill University, Dept. of Mining and Metallurgy, Montreal, Canada, НЗА 2A7


A new atomization technology was developed for the production of spherical powders and spray-formed shapes. The high enthalpy and high kinetic energy of multiple plasma jets were used to melt, superheat and atomize the raw materials. The plasma atomization process was tested for the production of Ti, Ni, Cu, Cu-Ni, and Al powders. Following optimization of the reactor and nozzle geometries, powders with an average particle size between 50 µm and 150 µm were produced. The powder recovery rate was over 95%, while the particle sphericity was excellent and contained no satellites. In some experiment, TiCI4 was introduced into the exit nozzle and mixed with the Ar plasma forming gas. The highly reactive plasma jets were used to melt and atomize an aluminum wire, and the resulting spray was deposited onto a fixed substrate. The consolidated product was a composite of AI-TiAI3 containing 10 % Ti. The deposit showed excellent mechanical properties.