Turbulence and Shear Flow Phenomena -1 First International Symposium
ISBN Print: 1-56700-135-1
MEASUREMENTS IN A FLAT PLATE TURBULENT BOUNDARY LAYER
Résumé
An experimental study has been made of flat plate turbulent boundary layers using hot-film and hot-wire techniques. The primary goals of the investigation were to investigate the scaling behavior of a turbulent boundary layer at high Reynolds numbers and especially the structure in the near wall region.
Results are here presented for the mean velocity and Reynolds stresses for Reynolds numbers based on the momentum thickness ranging from 2500 to 27000. The high Re makes it necessary to use very small probes in order to resolve the smallest scales in the turbulence. A large effort has been put into the design and construction of miniaturized hot-wires for this experiment. Measurements of the fluctuating skin-friction were made with the hot-wire on the wall technique and a new surface-micromachined MEMS-type hot-film sensor.
Results are here presented for the mean velocity and Reynolds stresses for Reynolds numbers based on the momentum thickness ranging from 2500 to 27000. The high Re makes it necessary to use very small probes in order to resolve the smallest scales in the turbulence. A large effort has been put into the design and construction of miniaturized hot-wires for this experiment. Measurements of the fluctuating skin-friction were made with the hot-wire on the wall technique and a new surface-micromachined MEMS-type hot-film sensor.
Begell Recommend
Electrospinning of Micro- and Nanofibers: Fundamentals in Separation and Filtration Processes Y. FilatovA. Budyka
V. Kirichenko ISBN Imprimer: 978-1-56700-241-6
ISBN En ligne: 978-1-56700-240-9
Thermal Radiation in Disperse Systems: An Engineering Approach Leonid A. Dombrovsky
Dominique Baillis ISBN Imprimer: 978-1-56700-268-3
ISBN En ligne: 978-1-56700-351-2