Heat and Mass Transfer Australasia
ISBN Print: 978-1-56700-099-3
Heat and Mass Transfer During Piloted Ignition of Wood
DOI: 10.1615/978-1-56700-099-3.270
pages 227-231
要約
This paper presents the results of an experimental and theoretical study of the heat and mass transfer processes that occur during piloted ignition of wood. The main objective is to present an engineering solution to the piloted ignition problem for wood exposed in a bench-scale piloted ignition test. A detailed numerical model was used to analyse the data. A number of ignition criteria were examined, however, it was found that a piloted ignition criterion based on surface temperature is quite adequate for engineering analysis. Based on this finding, an approximate model was developed which unlike other similar models takes into account the variation of the ignition temperature with external heat flux. The approximate model was then used for correlation of experimental data and derivation of key ignition parameters, such as the critical irradiance, q"cr, the ignition temperature, Tjg, and the critical mass flux, m"cr.
Begell Recommend
Electrospinning of Micro- and Nanofibers: Fundamentals in Separation and Filtration Processes Y. FilatovA. Budyka
V. Kirichenko ISBN 印刷: 978-1-56700-241-6
ISBN オンライン: 978-1-56700-240-9
Thermal Radiation in Disperse Systems: An Engineering Approach Leonid A. Dombrovsky
Dominique Baillis ISBN 印刷: 978-1-56700-268-3
ISBN オンライン: 978-1-56700-351-2