Begell House - Computational Thermal Sciences: An International Journal

Computational Thermal Sciences: An International Journal

Editor chefe: Wilson K. S. Chiu(open in a new tab) Helcio R. B. Orlande(open in a new tab)

Editor associado: David B. Carrington(open in a new tab) Pedro Jorge Martins Coelho(open in a new tab) George S. Dulikravich(open in a new tab) Ankur Jain(open in a new tab) Oronzio Manca(open in a new tab) Arun Kumar Nayak(open in a new tab) Akshai K. Runchal(open in a new tab) Bengt Sunden(open in a new tab)

Editor fundador: Graham de Vahl Davis(open in a new tab) Darrell W. Pepper(open in a new tab)

Publicou 6 edições por ano

ISSN Imprimir: 1940-2503

ISSN On-line: 1940-2554

Indexed in

Editor chefe

Wilson K. S. Chiu Department of Mechanical Engineering, University of Connecticut, 191 Auditorium Road, Storrs, CT, 06269-3139, USA Email: wchiu@engr.uconn.edu wilson.chiu@uconn.edu

Editor chefe

Helcio R. B. Orlande Department of Mechanical Engineering, Politecnica/COPPE, Federal University of Rio de Janeiro - UFRJ, Caixa Postal: 68503, Cidade Universitaria, Rio de Janeiro, RJ, 21941-972, Brazil; Nanotechnology Eng. Program, COPPE, Federal University of Rio de Janeiro, Brazil Email: helcio@mecanica.coppe.ufrj.br

Editor associado

David B. Carrington Los Alamos National Laboratory Email: dcpajarito@msn.com

Editor associado

Pedro Jorge Martins Coelho Mechanical Engineering Department, Instituto Superior Técnico, University of Lisbon, Av. Rovisco Pais, 1049-001 Lisboa, Portugal Email: pedro.coelho@tecnico.ulisboa.pt; pedro.coelho@ist.utl.pt

Editor associado

George S. Dulikravich none (retired) Email: gdulikravich@gmail.com

Editor associado

Ankur Jain Department of Mechanical & Aerospace Engineering University of Texas at Arlington, Arlington, TX, USA Email: jaina@uta.edu

Editor associado

Oronzio Manca Dipartimento di Ingegneria, Università degli studi della Campania Luigi Vanvitelli, Caserta, Italy Email: oronzio.manca@unicampania.it

Editor associado

Arun Kumar Nayak Department of Engineering Sciences, Homi Bhabha National Institute, Anushakti Nagar, Mumbai 400094, Maharashtra, India; Reactor Engineering Division, Bhabha Atomic Research Centre, Mumbai-400085, India Email: arunths@barc.gov.in

Editor associado

Akshai K. Runchal President and Founding Partner, Analytic Computational Resea, Whittier, CA, USA; CFD Virtual Reality Institute, Dharamsala, HP, India 176219 Email: runchal@gmail.com; runchal@ACRiCFD.com

Editor associado

Bengt Sunden BS Heat Transfer and Fluid Flow Email: bengsunden@telia.com

Editor fundador

Graham de Vahl Davis School of Mechanical and Manufacturing Engineering, University of New South Wales, Kensington, NSW, Australia Email: g.devahldavis@unsw.edu.au

Editor fundador

Darrell W. Pepper Nevada Center for Advanced Computational Methods, University of Nevada Las Vegas, 4505 Maryland Parkway, Box 454027, Las Vegas, NV 89154, USA Email: darrell.pepper@unlv.edu

Conselho editorial

Bantwal R. (Rabi) Baliga Department of Mechanical Engineering, McGill University, Montreal, Quebec H3A 0C3, Canada Email: bantwal.baliga@mcgill.ca

Soumik Banerjee School of Mechanical and Materials Engineering, Washington State University, Pullman, WA, USA Email: soumik.banerjee@wsu.edu

Liliane Basso Barichello Universidade Federal do Rio Grande do Sul Email: lbaric@ufrgs.br

Steven B. Beale Institute of Energy and Climate Research, Forschungszentrum Jülich GmbH, 52425 Jülich, Germany Email: s.beale@fz-juelich.de

Rachid Bennacer LEEVAM, University de Cergy-Pontoise, 5, Mail Gay Lussac, Neuville sur Oise, 95031 Cergy-Pontoise Cedex, Paris, France Email: rachid.bennacer@dgc.ens-cachan.fr

Ryszard Białecki Politechnika Śląska Email: ryszard.bialecki@polsl.pl

Gautam Biswas Department of Mechanical Engineering, Indian Institute of Technology, Guwahati, 781039 India Email: gtm@iitg.ernet.in

Gianni Comini Università degli Studi di Udine, Via delle Scienze, 208 33100 Udine, Italy Email: gianni.comini@uniud.it

Renato M. Cotta Department of Mechanical Engineering, Universidade Federal do Rio de Janeiro, Rio de Janeiro, RJ 21945.970, Brazil Email: renatocotta@hotmail.com cotta@mecanica.coppe.ufrj.br

Kyle J. Daun Department of Mechanical and Mechatronics Engineering, University of Waterloo 200 University Ave. W, Waterloo, ON, N2L 3G1, Canada Email: kjdaun@uwaterloo.ca

Leonid A. Dombrovsky Joint Institute for High Temperatures, Russian Academy of Sciences, Moscow, 111116, Russia; University of Tyumen, 6 Volodarskogo St, Tyumen 625003, Russia Email: ldombr4887@gmail.com; ldombr@yandex.ru

Rodney Douglass 835 Tiffany Court, Los Alamos, New Mexico 87544, USA Email: rwdnm@q.com

Charl G Du Toit DSI/NRF Chair in Nuclear Engineering, North-West University, Private Bag X6001, Potchefstroom, South Africa Email: Jat.DuToit@nwu.ac.za

Ivan Vladimirovich Egorov Deputy Director, Aerothermodynamics, Central Aerohydrodynamic Institute (TsAGI), 1, Zhukovsky Str., Zhukovsky, Moscow Region, 140180, Russia; MIPT, 9 Institutsky pereulok, Dolgoprudny, Moscow region, Russia Email: i_v_egorov@mail.ru; egorov.ivan.v@mipt.ru

Hakan Erturk Department of Mechanical Engineering, Bogazici University, Istanbul 34342, Turkey Email: hakan.erturk@boun.edu.tr

Haiwen Ge Zhejiang Laboratory, Hangzhou, China Email: gehaiwen@zhejianglab.com

Marcello Iasiello Universita degli Studi di Napoli Federico II, Department of Industrial Engineering, Piazzale Tecchio 80, 80125 Napoli (Italy) Email: marcello.iasiello@unina.it

Alain J. Kassab Department of Mechanical and Aerospace Engineering, University of Central Florida, 4000 Central Florida Blvd, Orlando, Florida, USA Email: Alain.Kassab@ucf.edu

Philippe Le Masson Département Sciences et Techniques, Université Bretagne Sud, Lorient, France Email: philippe.le-masson@univ-ubs.fr

Sylvie Lorente Villanova University, Department of Mechanical Engineering, Villanova, PA 19085, USA Email: sylvie.lorente@villanova.edu

Gerardo Maria Mauro

Department of Engineering, Università degli Studi del Sannio, Benevento, Italy

Email: germauro@unisannio.it

Abdulmajeed A. Mohamad Department of Mechanical and Manufacturing Engineering, Schulich School of Engineering, CEERE, University of Calgary, 2500 University Drive NW, Calgary, Alberta, Canada T2N 1N4 Email: mohamad@ucalgary.ca

Partha P. Mukherjee School of Mechanical Engineering, Purdue University, 585 Purdue Mall, West Lafayette, IN, USA Email: mukher28@purdue.edu

Angela O. Nieckele Department of Mechanical Engineering, PUC-Rio, Rio de Janeiro, RJ, Brazil Email: nieckele@puc-rio.br

Andrzej Nowak Silesian University of Technology Email: andrzej.j.nowak@polsl.pl

Dimos Poulikakos Department of Mechanical and Process Engineering, Eidgenössische Technische Hochschule Zürich, Zürich, Switzerland Email: dpoulikakos@ethz.ch

Alexander S. Rattner Sustainable Thermal Systems Laboratory, The George W. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, GA 30332, USA; Department of Mechanical and Nuclear Engineering, The Pennsylvania State University, University Park, PA, 16802 Email: Alex.rattner@psu.edu

Andrew Rees University of Bath Email: D.A.S.Rees@bath.ac.uk

Božidar Šarler Faculty of Mechanical Engineering, University of Ljubljana, Ljubljana, Slovenia Email: bozidar.sarler@fs.uni-lj.si

Mohammad Reza Shaeri Advanced Cooling Technologies, Inc., 1046 New Holland Avenue, Lancaster, PA 17601 Email: MohammadReza.Shaeri@1-act.com

Masahiko Shibahara Department of Mechanical Engineering, Graduate School of Engineering, Osaka University, 2-1 Yamadaoka, Suita, Osaka, 565-0871, Japan Email: siba@mech.eng.osaka-u.ac.jp

Evgueni M. Smirnov Department of Aerodynamics, St. Petersburg State Polytechnic University, 29, Polytechnitcheskaya Str., St. Petersburg, 195251, Russia Email: aero@phmf.spbstu.ru

Kazuya Tatsumi Kyoto University, Kyotodaiagku-katsura, Nishikyo-ku, Kyoto 615-8540, Japan Email: tatsumi@me.kyoto-u.ac.jp

Victoria Timchenko School of Mechanical and Manufacturing Engineering, The University of New South Wales, Sydney, NSW, 2052, Australia Email: v.timchenko@unsw.edu.au

Liqiu Wang Department of Mechanical Engineering, The University of Hong Kong, Pokfulam Road, Hong Kong Email: liqiu.wang@polyu.edu.hk

Qiuwang Wang MOE Key Laboratory of Thermo-Fluid Science and Engineering, School of Energy and Power Engineering, Xi'an Jiaotong University, No. 28 Xianning West Road, Xi'an, Shaanxi 710049, P.R. China Email: wangqw@mail.xjtu.edu.cn

Xiuling Wang Mechanical Engineering,Purdue University Northwest,Hammond, IN, USA Email: wangx@pnw.edu

Zhuomin M. Zhang George W. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, GA 30332, USA Email: zhuomin.zhang@me.gatech.edu

Gennady Ziskind Heat Transfer Laboratory, Department of Mechanical Engineering, Ben-Gurion University of the Negev, P.O.B. 653, Beer-Sheva 84105, Israel Email: gziskind@bgu.ac.il