Войти 0 Корзина покупок
Главная Книги е-Книги Журналы Справочники & Сборники Авторы, Редакторы, Рецензенты А - Я индекс
Progress in Plasma Processing of Materials, 2003

ISBN Print: 978-1-56700-192-1

ISBN Online: 978-1-56700-447-2



Flame sprayed coatings present very often reproducibility problems due to spray parameter variations. In fact the quality of coatings is strongly linked to the temperature and velocity of particles at impact and on the substrate, and coating temperature evolution before (preheating), during (spraying) and after (cooling).
The particle temperature and velocity measurements require sophisticated devices rather expensive and not well adapted to work in the harsh environment of spray booths. Moreover with flames the particle surface temperature is generally below 2200K which make the measurements more tricky than under plasma conditions. That is why, a new system, the Spray and Deposit Control (SDC) has been developed which allows to follow continuously both the light emitted by hot particles (maximum intensity, mean trajectory and trajectory dispersion) and the substrate and coating temperature evolution during spraying. This light system (800gr), fixed on the torch has been tested for flame spraying of NiAl. This paper presents the evolutions of SDC parameters with process and coating parameters, a strategy for an on-line control, and a zone of "correct values" and acceptable variations for the process inputs.
Главная Begell Электронный Портал Begell Электронная библиотека Журналы Книги е-Книги Справочники & Сборники Авторы, Редакторы, Рецензенты А - Я индекс Цены и условия подписки О Begell House Контакты Language English 中文 Русский 日本語 Português Deutsch Français Español